Settings And Checking - Edirol M-100FX Bedienungsanleitung

Settings and checking

■ Specifying the audio input/output destination
Windows XP/2000/Me users
1.
Open Control Panel.
Windows XP
Click the Windows Start button, and from the menu that appears, select
Control Panel.
Windows 2000/Me
Click the Windows Start button, and from the menu that appears, select
Settings | Control Panel.
2.
Open the Sounds and Audio Devices Properties dialog box
(or in Windows 2000/Me, Sounds and Multimedia Properties).
Windows XP
In "Pick a category", click "Sound, Speech, and Audio Devices". Next,
in "or pick a Control Panel icon", click the Sounds and Audio Devices
icon.
Windows 2000/Me
In Control Panel, double-click the Sounds and Multimedia icon to open
the "Sounds and Multimedia Properties" dialog box.
3.
Click the Audio tab.
4.
For MIDI music playback, click the t located at the right of [Default
device] (or in Windows 2000/Me, [Preferred device]), and select the
following from the list that appears.
5.
Close the Sounds and Audio Devices Properties dialog box.
Click [OK] to complete the settings.
This completes driver settings.
Next, you will need to make the Volume Control setting.
(→Volume Control setting (p. 133))
Connecting the M-100FX to your computer
fig.2-28_50
Windows XP
EDIROL M-100FX
Sound playback
Windows 2000/Me
USB Audio Device
Windows XP
EDIROL M-100FX
Sound recording
Windows 2000/Me
USB Audio Device
Depending on how your
system is set up, the
Sounds and Audio
Devices icon may be
displayed directly in the
Control Panel (the Classic
view). In this case, double-
click the Sounds and
Audio Devices icon.
If the Sound and
Multimedia icon is not
displayed, click "Show all
control panel options" in
the frame at the left.
For MIDI music playback,
you can leave these settings
as they are.
131