Edirol M-100FX Bedienungsanleitung Seite 13

Names of things and what they do
4 .....Phantom power switch (PHANTOM)
This is an on/off switch for the phantom power that is supplied to the XLR type mic input jacks.
* If a device that does not require phantom power is connected to the XLR type jack, you must turn
phantom power off; failing to do so will cause malfunctions.
5 .....Peak indicators (PEAK)
These indicators respond to the level of the sound that is being input to the mic input jacks. If the
input level is excessive, these indicators will light in red. Adjust the input level knobs (GAIN) so
that the peak indicators do not light.
6 .....Line input jacks 3/4–9/10 (LINE INPUT)
Cables with either phone plugs or RCA phono plugs can be connected here.
Line input jacks 3/4–5/6 provide both phone and RCA phono connections. If both are connected
simultaneously, the sound from the phone jack will take priority; the sound from the RCA phono
jack will be ignored.
Line input jacks 7/8–9/10 provide only RCA phono type connections.
Use the phone jacks to connect cables having phone plugs, such as those from electronic musical
instruments or effects processors. Use the RCA phono jacks to connect cables having RCA phono
plugs, from audio devices such as your stereo system or CD player.
7 .....External input jacks (AUX RETURN)
These are supplementary input jacks for receiving external sources. If you output sound from the
external output jack (AUX SEND) and process it with an external effects processor, you can use
these external input jacks to receive the sound from the effects processor. You can also use these
jacks to connect an external device in the same way as when using the line inputs.
Cables with phone plugs can be connected here. If you are inputting a monaural signal, connect it
to the L (MONO) jack.
8 .....External output jack (AUX SEND)
This is a supplementary output jack for sending sound to an external device such as an external
effects processor. If you want to use an external effects processor to process sound from the
M-100FX, connect this jack to the input jack of your effects processor.
A phone plug cable can be connected here.
This jack outputs the sound adjusted by the REVERB/AUX send level knobs of each channel. The
signal sent from this jack is monaural.
9 .....Monitor output jacks (MONITOR)
Connect these jacks to your external monitor system. These jacks output the sound that has been
mixed and processed by the M-100FX. The monitor volume knob adjusts the volume of these jacks.
10 ...Master output jacks (MASTER)
Connect these jacks to your external monitor system or recorder. These jacks output the sound that
has been mixed and processed by the M-100FX. The master volume fader adjusts the volume of
these jacks.
11 ...Headphone jack (PHONES)
Connect your headphones to this jack. Even if you are using headphones, sound will still be output
from the master output jacks. The headphone volume knob adjusts the volume of this jack.
13