Windows Me Users - Edirol M-100FX Bedienungsanleitung

Connecting the M-100FX to your computer

Windows Me users

1.
With the M-100FX disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse
(if used).
2.
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to exit it as well.
3.
Place the M-100FX's ADVANCE (mode select) switch in the OFF position.
fig.advance-off
4.
Use the USB cable to connect the M-100FX to your computer.
1. With the power switch turned OFF, connect the AC adaptor to the
M-100FX.
2. Connect the AC adaptor to an electrical outlet.
3. Use the USB cable to connect the M-100FX to your computer.
5.
Set the M-100FX's power switch to the ON position.
6.
Windows will detect the M-100FX, and the "Add New Hardware Wizard"
dialog box will appear.
Make sure that Automatic search for a better driver (Recommended) is
selected, and click [Next].
fig.05-23e_50
7.
Driver detection will begin.
126
Advanced mode is off
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong order,
you risk causing
malfunction and/or
damage to speakers and
other devices.
Always make sure to have
the volume level turned
down before switching on
power. Even with the
volume all the way down,
you may still hear some
sound when the power is
switched on, but this is
normal, and does not
indicate a malfunction.