Removing Noise - Edirol M-100FX Bedienungsanleitung

Removing noise

Sound that was recorded outdoors may contain unwanted noises. Here's
how you can minimize such unwanted noises.
fig.noise
Stereo set
Cassette deck
1.
Turn the input level knob and all input level faders to the minimum
position, and connect your monitor speakers and headphones.
(→Connecting monitor speakers or headphones (p. 19))
2.
As shown in the diagram, connect your cassette deck to the CH1 and CH2
mic input jacks (INPUT 1, 2). Connect the left channel of the cassette deck
to CH1, and the right channel to CH2.
3.
Adjust the gain and level.
(→Adjusting the gain and level (volume) (p. 22))
4.
Simultaneously press the effect switches of CH1 and CH2 to select Stereo
Control.
Stereo Control
Simultaneously pressing the CH1 and CH2 effect switches will select
Stereo Control. In this state, the CH1 and CH2 effect switches will both
light in red.
fig.HINT
If you have selected Stereo Control, operating the CH1 input level
fader or knobs will control both the left channel (CH1) and right
channel (CH2) simultaneously. Nothing will happen when you
operate the CH2 input level fader or knobs.
If you want to make additional adjustments to the sound, use the CH1 input
level fader or knobs.
5.
Set the audio/voice effect knob to [5] NOISE REDUCER.
Monitor speakers
111