Edirol M-100FX Bedienungsanleitung Seite 24

Basic operation
1.
Set the master volume fader to the position indicated by the
black marking on the panel.
fig.mic2
2.
Produce sound on the device connected to the line input
jacks.
Slowly raise the input level fader to increase the level. Set the level so that
the yellow indicator (0 dB) of the master volume indicator lights
occasionally. If you have connected devices to more than one line input jack
(channel) and want to record them, raise the input level faders for each input
channel you are using, and adjust them as desired.
fig.mic3-1
3.
If your recording device allows you to adjust the recording
level, adjust the level so that the peak indicator of your
recording device does not light, or so that the level meter stays
within the appropriate recording level.
4.
If you have connected monitor speakers, raise the volume of
your monitor speakers to an appropriate level.
5.
Turn the monitor volume knob or headphone volume knob
to the desired volume.
fig.mic4
24
Set the fader
in this area
Yellow LED
blinks