Service Time Menu; Date And Time - Faema BARCODE Gebrauch Und Installation

Pressing the PRG
on the display:
SERVICE TIME

DATE AND TIME

ON time
OFF time
Day off
Night ON
The following service time parameters can be modified:
- ON time (time the machine switches on);
- OFF time (time the machine switches off);
- day off (day on which the enterprise is closed);
- Night ON (start time for evening beverage price: only when
payment system is connected);
- Night OFF (end time for evening beverage price: only when
payment system is connected);
- Wash 1 (request - every 24 hrs - at the programmed hour;
cannot be disabled);
- Wash 2 ÷ 5 (hour of scheduled washes from 2 to 5)
General indications
If there is no day off (i.e. the enterprise never closes), enter
"none" for the "day off" item.
Enter the same time for the "ON time" and "OFF time"
parameters (for example:
ON time
OFF time
if the automatic switch on/switch off function is not required
and you wish to manually switch the machine on and off.
To modify the date and hour, press the
the corresponding line. The following message will appear:
DATE AND TIME
Year
Month
Date
Hour
Minutes
Downloaded from www.Manualslib.com
(29), the following message will appear
03:00
03:00
none
02:00
22:00
22:00)
PRG (29) key for
10
04 APR
21 WED
17
12
manuals search engine

Service time menu

"WASH 1" AND "WASHES 2 ÷ 5"
These are scheduled washes that are independent of the wash
cycles related to the switching on and switching off phases.
At the set hour, the messages "EXECUTE WASHING GROUP",
+ u
"EXECUTE WASHING MILK CIRCUIT", "EXECUTE SHORT
WASHING" appear, according to the programmed washing.
After having positioned the cursor on the line to be changed
and after having pressed the PRG
u
value using the "+"
the "OK" key to confirm.
Repeat the above operations to change the other wash
scheduling times.
"Wash 1"
When this function is requested, a long wash cycle is performed
(milk circuit and coffee circuit) as described in the "Cleaning
operations" paragraph.
NOTE: Wash 1 cannot be disabled. It is requested daily at the
programmed hour, and always within 24 hours.
"Washes 2 ÷ 5"
When these functions are requested, they can either be a long or
short wash cycle depending on how they were programmed.
If the set hour for these wash cycles occurs when the machine
is switched off, the request will be canceled.
NOTE: Set OFF against the time so as to not activate these
wash cycles.
OFF is displayed press the "-"
is "00:00".
For more details, please consult the technical manual at the
"Configuration menu - wash options" paragraph.
Date and time
Use the "+"
(black line) to the entry to be modified, then press the PRG
(29) key. The cursor will turn into an arrow
+ u
possible to change the number for the selected entry by using
the "+" (30) and "-"
Once the operation is completed, press the RES
to confirm the data.
Note: the cursor changes back to black line.
u
Repeat the operation described above to modify other para-
meters.
78
(29) key, change the
(30) and "-" (31) keys. Then press
(31) key the indicated time
(30) and "-" (31) keys to move the cursor
and it becomes
(31) keys.
(24) key