Fit External Cover(S) Pp 45 Ak, Pp 45 Ae And Pp 45 Aw - Maico PP 45 K Installationsanleitung

! CAUTION
Exercise caution when handling
construction foam.
 Wear protective gloves.
 Wear goggles.
9. For a 182 core hole, fix the wall sleeve
Ø
and shim with non-compressing or zero-
expansion construction foam. Cut off pro-
truding construction foam and shims flush
with the wall.
10. If walls have a wooden construction, addi-
tionally seal the interfaces to this construc-
tion. Stick sealing strips to the wall sleeve
in these areas. Suitable sealing material is
to be supplied by the customer.
Recessed-mounted box(es)
We recommend standard recessed-mounted
boxes for mounting the control components
listed below.
60 mm, depth of 66 or 61 mm for
Ø
● RLS 45 O room air control
● RLS 45 K room air control
● PP 45 EO wireless extension module
● PP 45 LT power unit
● PP 45 HY humidity sensor
● PP 45 CO2 CO sensor
2
● PP 45 VOC VOC sensor
When using more than 2 units, we
i
recommend installing the room air
control in an electronic switch box to
be supplied by the customer. This
provides sufficient space for the
connection of the cables to the room
air control.
9.2 Fit external cover(s)
PP 45 AE and PP 45 AW
! CAUTION
Exercise caution when handling
housing parts with sharp edges, e.g.
stainless steel external covers
 Wear protective gloves.
PP 45 AK,
Only mount external cover once
i
the external plastering is complete.
Formation of surface rust:
i
External factors (e.g. air containing
sulphur dioxide or salt, dust containing
iron etc.) may cause surface rust to
form on stainless steel.
We recommend thoroughly cleaning
unpainted stainless steel external covers
before mounting (remove dust and
fingerprints) and rub in a little oil (e.g.
care oil for stainless steel).
Drilling distances for external cover
PP 45 AE, PP 45 AW (stainless steel)
Drilling distances for external cover
PP 45 AK (plastic)
9 Mounting | UK
67