Maico PP 45 K Installationsanleitung Seite 53

PP 45 installation instructions
These installation instructions contain impor-
tant information about installing, operating
and setting PP45 ventilation components.
Once the final assembly is complete, the ven-
tilation system can be configured in service
mode depending on the system variant.
In the process, individual system components
can be registered and interfaces activated.
Please read these instructions carefully. Fol-
low the instructions. Pay particular attention to
the safety instructions.
Before commissioning, also read the operat-
ing instructions enclosed with the ventilation
units.
On the Maico homepage, you will find com-
missioning software for the PP45 RLS 45 K
control, that you can use to configure the
ventilation system by means of a notebook
(USB).
Acknowledgements:
© Maico Elektroapparate-Fabrik GmbH. Transla-
tion of the original German instructions. We cannot
be held responsible for mistakes or printing errors
and retain the right to make technical modifications
without giving prior notice. The brands, brand names
and protected trade marks that are referred to in this
document refer to their owners or their products.
PP 45 Installation instructions | UK
Commissioning software  online
Can be used with RLS 45 K room air control.
Download using QR code or go to
www.maico-ventilatoren.com.
Accessory components
For more information about the accesso-
ry components  Accessory component
supplement.
53