Werbung
Window Protocol Description
Communication Format
Communication Protocol
The communication protocol is a MASTER/SLAVE type where:
The communication is performed in the following way:
1.
2.
The MESSAGE is a string with the following format:
<STX>+<ADDR>+<WIN>+<COM>+<DATA>+<ETX>+<CRC>
where:
When a data is indicated between two quotes ('...') it means that the indicated
NOTE
data is the corresponding ASCII character.
TSP Controller User Manual
8 data bit
no parity
1 stop bit
baud rate: 600/1200/2400/4800/9600/19200/38400
programmable
Host = MASTER
Controller = SLAVE
the host (MASTER) send a MESSAGE + CRC to the controller
(SLAVE);
the controller answer with an ANSWER + CRC to the host.
/
87-900-138-01
Technical Information
Window Protocol Description
5
113/127
Werbung
Kapitel
