Werbung
To select the desired operating mode press the SET key. The
controller comes back to the normal operating mode and the display
shows one of the following messages, depending on the source type
selected.
M
or:
T
The message MAN at the end of the second row can be different. It
depends of the operating mode selected:
The controller escape automatically from the operating mode selection before
NOTE
30 second, if no selection are made, and return to the normal operation. If the
MODE key is pressed during the operating mode selection the Sublimation
Controller returns to the normal operation and the operating mode remains that
previously selected before the activation of the operating mode selection.
Sublimation Parameters Setting
The mode by means of which is possible to modify the sublimation
parameters depends on the selected operating mode (MANUAL,
AUTOMATIC, REMOTE SET and AUTOMAT/REMOTE). In the
following paragraph are described the different setting for each
operating mode. To display the sublimation parameters menu and to
switch from one page to another, press the ▼ or ▲ keys.
TSP Controller User Manual
i
n
i
S
P
F
in mode AUTOMATIC the message become AUT
in mode REMOTE SET the message become REM
in mode AUTOMAT/REMOTE the message become A/M.
/
87-900-138-01
T
i
-
b
a
i
l
a
m
e
Technical Information
Use
l
l
M
A
n
t
X
M
A
95/127
5
N
N
Werbung
Kapitel
