Werbung
Sublimation Controller Specification
Tab. 3
Input:
Voltage: (selectable
at the rear of the case)
Frequency:
Power:
Fuse:
Operating:
Temperature
Humidity
Storage temperature
In compliance with norms
Protection category
Internal use only
Installation category
Pollution degree
Power cable
Weight
When the controller is powered by means of a transformer, the transformer
NOTE
power must be at least 3000 VA to avoid a distortion of the power waveform.
TSP Controller User Manual
100, 120, 220, 240 Vac ±10% 1-phase
90 to 110 Vac - 1 phase (use setting 100 Vac)
110 to 130 Vac - 1 phase (use setting 120 Vac)
190 to 230 Vac - 1 phase (use setting 220 Vac)
230 to 265 Vac - 1 phase (use setting 240 Vac)
47 to 63 Hz
1400 VA (maximum, see note)
2 x T15A (slow blow) 250V 5x20 fuses
(only for model 929-0032)
2 x T8A (slow blow) 250V 5x20 fuses
(only for model 929-0033)
0 to + 45 °C
90 % maximum non condensing humidity
-20 °C to +70°C
EN 61010-1 (2001)
EN 61326-1 (2006) - Class A
(industrial application)
IP 20
II
2
3 meters long
3 wires Ø AWG14, NEMA plug (only for model 929-0032)
3 wires Ø 0.75 mm
(only for model 929-0033)
12 Kg (26.5 lbs)
/
87-900-138-01
Technical Information
Sublimation Controller Specification
European plug
2
5
79/127
Werbung
Kapitel
