Werbung
Operation in AUTOMAT/REMOTE Mode
The operation is the same as previously described for AUTOMATIC
operation, but the current depends on the signal incoming to the I/O
connector. The display shows:
S
To end sublimation, press the SUBLIMATION key and the relevant
Led is turned off.
In this operating mode, as in REMOTE SET, it is possible to display
the current measured on the incoming signal on the I/O connector
pressing SET key. The message displayed is the same shown in
REMOTE SET operating mode excepted for the script A/R in place of
REM at the end of the second row.
Sublimation Timing
In the next page the figures of the sublimation timing in the different
operating modes are shown.
With the Sublimation Period set to CONTINUOS the first Sublimation
Cycle becomes endless. The sublimation can be stopped with
SUBLIMATION ON-OFF key.
Operational Flow-Chart
In the following page it is shown the operational flowchart that
indicates all the major function of the Sublimation Controller is
shown.
TSP Controller User Manual
U
B
L
.
X
X
X
X
X
/
87-900-138-01
Technical Information
Sublimation Timing
P
R
E
S
S
m
b
a
r
5
U
R
E
103/127
Werbung
Kapitel
