Werbung
5
Technical Information
Sublimation Controller Description
The controller converts mains voltage supply into a single-phase, low
voltage, high current output which is required to power the pump.
The controller can be operated by a remote hostcomputer via the
serial connection.
The microcontroller generates the variable output current and
controls it according to the user settings and the pump status
(cartridge depletion).
Moreover, it manages the signals from input/output connections, the
information to be displayed, and gives outputs for a fully automatic
operation.
An EEPROM internal to the microcontroller is used to store pump
operating parameters and the input/output programmed
information.
The controller can be operated via:
78/127
front panel switches;
RS 232 and RS 485 serial link.
TSP Controller User Manual / 87-900-138-01
Werbung
Kapitel
