Operating Environment / Requirements; Limits Of Use - BigRep STUDIO Betriebsanleitung

Safety
2

2.5. Operating Environment / Requirements

The BigRep STUDIO can't be used at heights above 2000 meters above sea level.
Make sure the ground is leveled and
has sufficient load-bearing capacity.
Make sure there is enough free space
between the machine and the ceil-
ing (at least 1 m to the device).
Make sure that there is a free zone of
at least 1m to all sides off to the de-
vice (Fig. 2-2).
Take particular care to ensure that there is enough free space behind the control
cabinet (T) at the back of the printer. (See Fig. 3-1 following page)
Once printing has started, the device may not be made accessible to any unautho-
rized persons!
For a satisfactory printing process, make sure to:
›
Avoid high humidity
›
Keep the temperature in the operating environment between +15° and +35° C
›
Avoid strong drafts during the printing process
›
Avoid direct exposure of the device to sunlight
›
Not operate the device on surfaces particularly sensitive to vibrations
›
Avoid serious indoor air pollution with dust (e.g. sanding dust)
›
Avoid inadequately adjusted lighting levels

2.6. Limits Of Use

The printer is not appropriate for
›
Heating food
›
Printing food
›
Illumination of rooms
56
Chap 2.3 Operator Obligations
&
Fig. 2-2: Free zone
BigRep STUDIO