Introduction; General Information; Intended Use - BigRep STUDIO Betriebsanleitung

Introduction

1
1. Introduction
Please read this manual carefully before using the printer. Keep this manual in an
easily accessible place for later reference if needed.
If you have questions, please get in touch with our customer support service
[support.bigrep.com].

1.1. General Information

Manual / Version
2017/11/27
Copyright / Legal Notice
BigRep GmbH
Gneisenaustraße 66, 10961 Berlin
Germany
Managing Directors: René Gurka, Stephan Beyer
Contact: support@bigrep.com
This manual may not be reproduced or distributed beyond operational needs
without prior consent.
© BigRep GmbH, 2017, Berlin
Warranty
If the device was purchased by the buyer directly from BigRep GmbH, the statute
of limitations period for claims and rights relating to defects (period of warranty) is
12 months from the date of delivery; furthermore, BigRep GmbH's General Terms
and Conditions apply. If the device was not purchased directly from BigRep, all con-
tractual claims and rights relating to defects apply only with the respective vendor.
No further agreements, consents, assurances, and/or guarantees are given by
BigRep in this manual.

Intended Use

The BigRep STUDIO has been designed and built for manufacturing three-di-
mensional workpieces from common 2.85 mm diameter, thermoplastic filament
strands. The machine is intended for industrial and commercial use. It is not valid
for the operation in an explosive atmosphere.
Observing this manual and adhering to the stated information is part of the proper
operation. Improper operation of the machine can lead to hazardous situations.
It is forbidden to operate the machine under conditions and for purposes other
than stated in this manual.
50
BigRep STUDIO