General Safety Instructions - BigRep STUDIO Betriebsanleitung

BigRep STUDIO
Never attempt to bypass or deactivate fuses!
Keep moisture away from live parts!
Electrostatic charge hazard. It is not allowed to operate the device in explosive
environments!
In case of water damage disconnect the device from its power source!
Switch device off completely and disconnect from power source before conduct-
ing any work on the electrical system as well as before any maintenance and re-
pair work.
Any work on electrical components may only be carried out by qualified special-
ists. This applies especially for any work on components inside the control cabinet!
It can be that electrical cables cause the machine to be electrified. Perform visual
inspection before use.
Chemical Hazards
Please be sure to always refer to the specifications provided by the manufacturer
or retailer for the individual types of filament material.
CAUTION – Toxic Fumes and Substances
Never clean the print bed with solvent-based detergents. They may produce
toxic fumes when heated.
Unauthorized filaments can produce vapors with harmful health eff ects. Ex-
clusive use of printing materials approved in the operating instructions.
Contaminant intake: Do not eat at the working place. Do not eat, drink, or
smoke at the machine working space. Wash hands before breaks and aft er
working with the machine.
Make sure that the working environment is suff iciently ventilated during the print-
ing process.

General Safety instructions

Always store sharp tools in a safe place.
Danger from Rotating Parts
WARNING – Catching and Winding Hazard
Rotating machine parts can cause injuries from entanglement. Hair and
clothing can get caught and wound up in the spindles. Wear tight-fitting
work clothes. Protect long hair with head wear. Do not wear gloves. Do not
wear jewelry.
Safety
2
53