Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1st byte:
bit 'F'
bit 'E'
2nd byte:
bit '7'
bit '6'
least significant 3 bits of the COB ID
The "Frame Filter" indicates which bits of the 1st and 2nd bytes of the CAN identifier are to be set (bit
= 1), to be reset (bit = 0) or are not to be considered (bit = X) so that the message can pass the filter
thus being considered for the bus statistics.
With the keys 0-9 or A-F the individual bits of the 16-bit mask can be changed.
With the key "ENTER" the bus statistics are indicated by using the entered filter.
Menu All Frames
Fr/s
Tot.
Data:
215
5310
Error: 10
34
Busld: 30%
45%
Data
Display of the data frames per s and their total number
Error
Display of the number of the error frames per s and their total number.
Overl Display of the number of the overload frames per s and their total number.
Busld Display of the bus load in % per s and the total bus load in %.
With the key "0" all values can be reset to zero. If a value becomes greater than "9999", "OvFl"
(overflow) is indicated.
bit 'D'
bit 'C'
most significant 8 bits of the COB ID
bit '5'
bit '4'
RTR bit
bit 'B'
bit 'A'
bit '3'
bit '2'
data length (DLC)
bit '9'
bit '8'
bit '1'
bit '0'
Seite/Page 57
Werbung
Inhaltsverzeichnis
