Main Menu; Menu Canopen Main; Menu Service Mess - IFM Electronic EC2036 Bedienungsanleitung

2.

Main menu

F1 CANopen Main
F2 Node Config.
F3 Layer-2 Main
F4 Baud: 125 kBps
F1 CANopen Main
F2 Node Config.
F3 Layer-2 Main
F4 Baud: 125 kBps

2.1. Menu CANopen Main

F1 Service Mess.
F2 Input, Output
F3 Trace
F4 Bus-Statistic
F1 Service Mess.
F2 Input, Output
F3 Trace
F4 Bus-Statistic

2.1.1. Menu Service Mess.

F1 NMT-Services
F2 User Defined
F3 SDO1 Upload
F4 SDO1 Download
F1 NMT-Services
F2 User Defined
Opens the CANopen main menu (section 2.1.).
Opens the node configuration main menu (section 2.2.).
Opens the Layer 2 main menu (section 2.3.).
Changes the baud rate (section 2.4.).
Enables the sending of service messages (NMT, SDO and user-defined) to
any slave nodes.
Setting outputs and monitoring inputs via PDO messages.
Tracing and display of messages transferred via the bus at the layer 7 level.
Monitoring the bus at the layer 2 level, display of the number of data and
error frames as well as the bus load.
Sending NMT messages to any slave nodes.
Sending a user-defined message.
Seite/Page 35