Menu Sdo1 Download; Menu Input, Output - IFM Electronic EC2036 Bedienungsanleitung

Menu SDO1 Download

Node-ID: ddd
Index: xxxx
Subindex: xx
Length: d or Dat:
Node-ID: ddd
Index: xxxx
Subindex: xx
Length: d:
Dat: 00 ... 00
After the last data byte has been entered the SDO message is sent and the terminal awaits a
response from the module. If writing to the variable has been successful, the node ID is followed by
(+), if not by (-). If the response is negative, the error codes are indicated in line 4 of the display (e.g.
Rsp: 12 34 56 78).
Only SDOs with a length of max. 4 bytes are supported. The input is hexadecimal with the most
significant byte being entered first and the least significant byte last.

2.1.2. Menu Input, Output

F1 PDO1 Outputs
F2 PDO1 Inputs
F3 PDOx Outputs
F4 PDOx Inputs
F1 PDO1 Outputs
F2 PDO1 Inputs
F3 PDOx Outputs
F4 PDOx Inputs
Seite/Page 38
Input of the slave node address (3 digits, decimal) or "0" for a "broadcast"
message (all slave nodes are accessed).
Input of the variable index of the object directory (4 digits, hexadecimal).
Input of the variable subindex of the object directory (2 digits, hexadecimal).
Input of the data length (1 to 4, 1 digit, decimal).
After the input of the data length the data are entered.
Enables the setting of digital outputs.
Monitors digital inputs.
Enables the setting of analog or digital outputs (PDO1 to PDO9).
Monitors analog or digital inputs (PDO1 to PDO9).