IFM Electronic EC2036 Bedienungsanleitung Seite 44

F1 NMT,GUAR,EMGY
F2 SDO-Mess.
F3 PDO-Mess.
F4 All Types
The selected messages from the buffer are then displayed.
All messages in the buffer or the messages in the buffer selected in the menu "Selective Read" are
displayed in plain language. With the selected trigger type "Auto" the first message in the buffer is
indicated. With all other trigger types the first message displayed is the one in the buffer which
released triggering.
Ï Ð
The keys and enable scrolling through the buffer contents. With the keys Home and End you
jump to the beginning or end of the buffer contents.
The first three characters of the message display show the node address (3 digits, decimal) of the
message. Then comes the message type in plain language consisting of 12 characters. For messages
which contain additional data these data are indicated right-aligned in hexadecimal format in the
following line.
With the T key the time stamp for the messages can be indicated (toggle). The display is in 4 digits in
decimal format in steps of 1 ms starting when "F3 *Start* has been pressed (e.g. 012 SDO1 ST:0732).
With the key "0" the time stamp for the message in the first display line can be set to "0000" as a
reference time stamp.
Seite/Page 44
Selection of which type of service message is to be displayed.
F1 NMT-Mess.
F2 GUARD-Mess.
F3 EMERGCY-Mess.
F1 NMT-Mess.:
F2 GUARD-Mess.:
F3 EMERGCY-Mess.:
Only all SDO messages are displayed.
Only all PDO messages are displayed.
All message types are displayed.
All NMT messages release triggering.
All Guard messages release triggering.
All Emergency messages release triggering.