Preparation; Connections At The Back; Preparing The Telephone For Use As Desktop Unit - Auerswald COMfortel 1200 Inbetriebnahmeanleitung

This section describes the preparations required before commissioning the device. This
includes adjusting the height and connecting the receiver and a headset (not included in the
package). Furthermore, this includes installing the telephone in a suitable location or mount-
ing it on a wall.

Connections at the Back

Fig. 9: Sockets
A Receiver socket
B Headset socket (only COMfortel 1400)
C MicroSD/SDHC card socket (only functional on the COMfortel 1400)
D ISDN cable socket

Preparing the Telephone for Use as Desktop Unit

Requirements
– The feet of the casing delivered with the telephone
1.
Assemble the feet of the casing in the required position (see Fig. 10 on
page 40).
Note: The feet can be assembled in three different positions.
2.
Push the feet inward up to the stop.
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015

Preparation

Preparation
39