Appendix; Querying The Firmware Version/Serial Number; Performing A Firmware Update Via The Update Server - Auerswald COMfortel 1200 Inbetriebnahmeanleitung

Once you have put your telephone into operation and configured it, check this section on
operation and configuration for additional useful information.

Querying the Firmware Version/Serial Number

1.
Press the menu key.
2.
Select the information menu:


3.
Confirm your selection:


4.
Scroll to the desired information:



Performing a Firmware Update via the Update Server

Important: Only available for operation on the PBXs COMpact 3000 ana-
logue/ISDN/VoIP, COMpact 4000, COMpact 5010 VoIP, COMpact 5020
VoIP, COMmander 6000/R/R, COMmander Basic.2/19" and COMmander
Business/19". On the other PBXs a manual firmware update can be per-
formed instead.
Requirements
– PBX connected to broadband Internet access
– Address of the update server configured in the PBX
– DNS server and, if necessary, HTTP proxy server configured in the PBX
1.
Press the menu key.
2.
Open the following menu:


COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015

Appendix

COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: Press the OK key.
COMfortel 1400: Tap on OK or press the OK key.
The information selected last will be displayed.
COMfortel 1200: Press the arrow keys
COMfortel 1400: Tap on
COMfortel 1200: settings > synchronisation > firmware update
COMfortel 1400: settings > synchronisation > firmware update > FW
update server
or
or or press the arrow keys
or
or or press the arrow keys
Appendix
.
or
.
or
.
.
51