Inserting The Lettering Label; Cleaning The Telephone - Auerswald COMfortel 1200 Inbetriebnahmeanleitung

2.
Tap successively on settings > synchronisation > distr. firmware > im-
mediately.
3.
Proceed as follows:



Inserting the Lettering Label

Requirements
– Lettering label. On page 63 of these instructions, you will find lettering
labels that can be cut out and labelled manually. Using the COMfortel Set
configuration software, you can easily create and print your lettering labels
(page Function keys > Print button).
– A flat tool (for example, a small flat-head screw driver)
1.
Insert a flat tool (for example a small flat-head screwdriver) into the slot at
the top of the transparent cover and remove the cover in upward direction.
2.
Insert the lettering label.
3.
Reinsert the cover with the mat surface upwards.

Cleaning the Telephone

1.
Clean the casing with a slightly moist cloth or anti-static cloth.
2.
Clean the display of the COMfortel 1400 only with a soft, dry cloth.
Warning: Liquid entering the casing can cause life-threatening electric
shocks or damage or destroy the telephone.
 Only clean the casing of the device with a slightly moist cloth or an anti-
Caution: Cleaning agents may damage the surface.
 Do not use caustic or solvent-containing cleaning agents.
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
COMfortel 1200: Press the OK key.
COMfortel 1400: No further action required.
The firmware is distributed. During the distribution process, Server
Mode is displayed on the distributing telephone. It is not possible to use
the telephone during this process.
static cloth.
Appendix
53