Auerswald COMfortel 1200 Inbetriebnahmeanleitung Seite 47

– Existing release code from the Upgrade Center (against a fee, see
www.auerswald.de/service)
1.
Insert the memory card, as shown, into the slot marked with
tom of the telephone.
Fig. 16: Inserting the memory card
Notes: The standard announcements for different answering machine
functions are copied from the telephone to the memory card automatically
(only German and English).
You can switch off the readiness (call acceptance) by tapping on
switch it on again by tapping on
status.
Important: If the initialisation is not successful after inserting the memory
card (
2.
Press the menu key.
3.
Tap successively on answer.machine > activation.
4.
Enter the release code via the keypad.
5.
Tap on OK to complete the entry.
Further steps
– Create one or more separate announcements (see page 48).
– Configure the answering machine according to your requirements. Carry
out the configuration either using the menu on the telephone display (see
COMfortel 1200/1400 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V02 05/2015
When is shown at the bottom right of the display, this indicates that
the memory card is being initialised and the required directory structure
is being created.
is still visible with short interruptions), the card is not supported.
The answering machine has now been activated.
Commissioning
. The symbol always reflects the current
on the bot-
and
47