Connect The Scanner Power Cord - Xerox DocuMate 3125 Benutzerhandbuch

Scanner Setup
4. Pull the output tray down from the scanner body. It will snap in place when it is down all the
way. Make sure the bottom of the tray is down all the way before scanning. If the tray isn't
fully seated in position, paper feeding from the input tray may jam in the scanner.

Connect the Scanner Power Cord

Note: Only use the power supply (HEG42-240200-7L made by HiTron or DA-24C24 made by
APD) included with your scanner. Connecting any other type of power supply may damage your
scanner, and will void its warranty.
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply and into a wall outlet.
User's Guide
® ®
Xerox DocuMate 3125
3-10