Hardware Properties And Interface Behavior - Xerox DocuMate 3125 Benutzerhandbuch

Scanning from TWAIN and WIA
• Reset device—click this button to revert the scanner hardware back to the scanner's
firmware defaults. As this option resets the scanner hardware, you will not see a change in
the interface unless the power save time has been changed. Clicking this button includes
returning the power save time-out to the default setting.
Scanner maintenance:
Counters—click the reset button next to the counter you want to set back to 0.
•
You can use this option to monitor the number of scans completed since the last time a
part has been replaced.
Hardware Properties and Interface
Behavior
You can use the scanner's properties page to keep track of scanner maintenance, change some
of the hardware options, configure the scanner interface behavior, and adjust application
options that may be available for your scanner.
To open the scanner hardware properties page:
• Windows 7 and 8—from the Windows Control Panel, open Hardware and Sound and then
Devices and Printers.
Right-click on the scanner and then select Scan properties from the list. Click Yes if you are
prompted by the Windows User Account Control to confirm that you want make changes
to the system settings.
Windows Vista—from the Windows Control Panel, open Hardware and Sound and then
•
Scanners and Cameras.
Click on the scanner icon then click on the Properties button. Click Yes if you are prompted
by the Windows User Account Control to confirm that you want make changes to the
system settings.
• Windows XP—from the Windows Control Panel when in category view, open Printers and
Other Hardware and then Scanners and Cameras.
Right-click on the scanner and then select Properties from the list.
User's Guide
® ®
Xerox DocuMate 3125
7-144