Xerox DocuMate 3125 Benutzerhandbuch Seite 119

® ®
Xerox DocuMate 3125
5. Move or resize region 1 until the sample image area you want is within the scan region.
Resize the region by clicking on one edge of the region outline and dragging the mouse.
Move the region by clicking in the region then dragging the mouse. Please refer to
Resize, or Delete Regions
6. Create additional scan regions as needed by clicking anywhere in the sample image, hold
your mouse button down, and then drag your mouse to create a scan region. Release the
mouse button when the area you want is within the rectangle.
If you want to create a region that overlaps another region, hold the Ctrl (control) key on
the keyboard while you click and drag the mouse to create the region. You can release the
Ctrl key after you start creating the overlapping region. You only need to hold down the Ctrl
key if the starting point of the overlapping region is over another region. If you do not hold
down the Ctrl key, when you click on the area that has already been set as a region you will
move the existing region.
Click Close when you are done creating scan regions.
7.
7-111
for detailed instructions.
Scanning from TWAIN and WIA
Move,
User's Guide