Xerox DocuMate 3125 Benutzerhandbuch Seite 135

® ®
Xerox DocuMate 3125
Manual Feed
Select this option to enable a delay from when the last page is scanned and when the scanner
stops the scan job. This allows you to scan one page at a time without having to click Scan for
each page you put in the scanner.
To scan with manual feed mode:
Select Manual feed in the scanner's interface.
1.
2. In the Timeout field, input the amount of time you want the scanner to wait from when
the last page is scanned and when the scanner stops scanning.
3. Place a document in the scanner.
4. Click Scan.
5. The scanning progress dialogue on-screen will display a countdown indicating how much
time you have to place the next document in the scanner.
6. When you are done scanning all pages in your document, you can click on Abort to stop the
timer or simply let the timer run out.
Straighten Image
Select this option to let the scanner automatically determine if a page is skewed, then
straighten its image. This option is only available if the scanner supports this feature.
If you are scanning using an automatic document feeder, and the page is fed through at too
great of an angle, the image may not straighten correctly. In that case, re-scan the page
making sure the paper guides are adjusted to the width of the pages in the input tray so that
the pages are pulled straight through the scanner.
Rotate Image
Select an option in this list to have the final image rotated when scanning is complete.
Flip Back Side
Select this option if you are scanning duplex pages that are calendar style orientation. This
option will rotate the back side image 180 degrees from the front side. When scanning in
duplex mode without this option selected, the back side image of calendar orientation pages
will appear upside down in the final scan. This option does not automatically determine book
page orientation versus calendar page orientation. If you have this option selected when
scanning book orientation pages, the image for the back side of the page will appear upside
down in the final scan. If you are scanning a batch of documents that contain both types of
orientation, we recommend that you select Automatic in the Rotate image list.
7-127
Scanning from TWAIN and WIA
User's Guide