Xerox DocuMate 3125 Benutzerhandbuch Seite 88

Scanning and Configuring One Touch
You must configure this destination before attempting to scan to it the first time. If you scan
without configuring the link first, the One Touch log viewer will open and show that sending the
image to the Send to Application link failed.
• Click the Properties button to open the One Touch Link Properties for the Send to
Application link. From this window, you can configure the default application for this link.
After configuring the link properties, all of the default scan configurations will immediately
update to send to the application you specify in this window. When you create new
configurations, the default settings will also match what you have selected here. If you
modify the options in an individual configuration, changing the options in this Link
Properties window will no longer update to the configurations you modified.
• Click the New, Copy, or Edit button to open the Scan Configuration Properties window.
Click on the Send to Application tab and use this window to set a configuration to scan to
a different application than the one selected in the Link Properties window.
Changing the options in this window only affects the configuration you are creating or
modifying. All other configurations will retain their settings for this destination.
User's Guide
® ®
Xerox DocuMate 3125
6-80