Xerox DocuMate 3125 Benutzerhandbuch Seite 41

® ®
Xerox DocuMate 3125
Note: Use Configure Before Scan if you want to set the options manually before scanning. See
Configure Before Scan on page 44.
Create a new configuration:
• Click the New button to create a new configuration starting with the One Touch default
configuration settings.
Select a configuration in the list, then click on the Copy button to create a new
•
configuration starting with the settings of the currently selected configuration.
Edit or delete a configuration:
Select the scan configuration you want to edit or delete.
To delete the configuration, click the Delete button.
•
• To edit the configuration, click the Edit button.
Edit the settings and click OK.
Note: Your scanner comes with a number of configurations pre-set at the factory. To ensure
that your scanner will always have a set of correct scan configurations, do not delete the pre-set
configurations. We also recommend that you keep those configurations locked so they are not
inadvertently deleted. That way, you will always have the factory-settings available. If you do
delete or edit them, and want to get the factory pre-sets back again, you will need to uninstall
then re-install your scanner.
In the Scan Configuration Properties window, the Scan Settings, Page Settings, Advanced
Settings, and Redaction Settings tabs are always available. When the Visioneer Acuity module
is installed, the Acuity Settings tab will also be available for all destinations.
Based on the selected destination, additional settings tabs may also be available. If you see
one of these additional settings tabs please refer to the appropriate section, as listed below, for
instructions on configuring these destination specific options.
Use the Storage Options tab to choose the storage folder for scans sent to the Transfer to
•
Storage destination, as described on page 47.
• Use the Device Settings tab to configure Fax and Print destinations, as described on
page 54.
• Use the PaperPort tab to choose the destination folder, in the Nuance PaperPort
application, as described on page 55.
Use the SharePoint tab to specify a SharePoint site, user credentials, and destination
•
folder, as described on page 57.
• Use the FTP Transfer tab to specify an FTP site, user credentials, and destination folder, as
described on page 60.
• Use the SMTP Configuration tab to specify an SMTP server, user credentials, and
destination email address, as described on page 63.
6-33
Scanning and Configuring One Touch
User's Guide