Scanning And Configuring One Touch; Default One Touch Settings - Xerox DocuMate 3125 Benutzerhandbuch

6 Scanning and Configuring
One Touch
Based on the recommended full installation of the scanner driver and the Visioneer One Touch
software, One Touch is your main scanning interface for using the scanner.
The One Touch Button Panel, that you see on the computer screen, shows the pre-set function
for each button (such as Email) and the icon of the destination (called the Destination
Application) where the images will be sent when scanning is finished.

Default One Touch Settings

When you installed the scanner, the software configured each One Touch button with
appropriate settings consisting of: a Destination Application, a Scan Configuration, and a File
Format. The button names, such as Email or Copy, indicate the original factory settings for a
button. You can change any of these settings. Please see
page 27 for instructions.
For example, the Email button is set up to scan documents then immediately attach them to a
new email message in your default email program. The email application will default to the
email program specified in the internet options of Internet Explorer.
A folder icon for a button means that the button is set up to archive the scanned item. The
scanner sends the scanned image directly to a folder without opening the image first in a
software application.
A question mark for a button means your computer does not have the appropriate software or
hardware for the initial factory settings.
User's Guide
The One Touch button panel shows which
application the button is configured to send
images to.
Changing the Button Settings on
6-25