SOLIS EASYVAC Professional Typ 572 Bedienungsanleitung Seite 107

– Close the appliance cover and push down the handle
all the way. The cover is now locked into place (see ill. E).
The Ready function light will illuminate.
– Press the Manual Seal button (D) to start the sealing
process (see. ill F). The red control light will illuminate
and go off to indicate that the sealing process has been
completed.
– Pull up the cover handle (4) to open the appliance cover
(see ill. G).
– Pull up the cover handle and remove the bag.
– Check if all welds are even and without creases (see
ill. H). Should this not be the case, repeat the process.
E
F
G
H
107