Saving The Results; Displaying And Marking Saved Results; Printing And Transferring Results - Mettler Toledo Refracto 30PX Bedienungsanleitung

6.5

Saving the results

The instrument can save up to 1100 results internally. Each time a result is
saved, the sample number increases by one.
The symbol appears in the display: Saving all results automatically
The instrument saves all results automatically. After the measurements, as soon
as the result is saved, Ready appears on the display.
The symbol does not appear in the display: Saving selected results manually
After the measurements, the result appears in reverse display.
Save the result:
- Press the ok/measure key.
Do not save the result:
- Press the esc key.
Ready appears on the display and the instrument is ready for the next measure-
ment.
6.6

Displaying and marking saved results

Displaying saved results
- Press the key.
The sample number flashes and the symbol
- Scroll through the saved results using the
Marking results
For the identification of invalid or incorrect results or for marking a sample change.
- Select the desired sample number using the
- Press the ok/measure key.
The selected sample number is marked with an asterisk.
Note
The marking is removed if the sample has already been marked.
6.7

Printing and transferring results

Conditions
• The interface and peripheral device are configured properly, see Chapter 5.5
and Chapter 8.
• For PRN and RS interfaces, the infrared adapter must be connected to the
printer/PC.
The procedure for printing and transferring results is dependent upon the settings
in the menu (see Chapter 5.4).
Important
To transfer or print results, hold the instrument in the direction of the infrared
adapter at a maximum distance of approx. 20 cm.
The symbol appears in the display: Printing or transferring results
automatically
Every displayed result is transferred automatically.
METTLER TOLEDO Refracto 30PX/GS
Measurement (measure)
appears.
and keys.
and keys.
13