Before The Installation; Flange Placement; Flange Requirements - Mettler Toledo GPro 500 Kurzanleitung Zur Einrichtung

Quick Setup Guide TDL GPro™ 500

2 Before the installation

Flange placement

Flange requirements

60 cm (23.6")
The TDL head should be easily accessible. A person should be able to stand in
front of it and adjust the M16 fixing bolts using two standard spanners. There
should be at least 60 cm free space measured from the flange fixed to the stack
and outwards as shown below.
min. clearance: 61,5 mm
(schedule 40)
DIN 50 or ANSI 2"
100 mm
(4")
min. clearance: 77,5 mm
(schedule 80)
DIN 65 or ANSI 2½"
7