Installation; Installing The Batteries - Mettler Toledo FiveGo DO meter FG4 Bedienungsanleitung

3 Installation

The installation is simple and requires virtually no time.
a) Carefully unpack the meter.
b) Keep the calibration certificate in a safe place.

3.1 Installing the batteries

a) Pull the fixing point of the release button on the battery cover in the direction of the arrow on the dia­
gram.
b) Hold the lid with two fingers and remove it.
c) Insert the batteries in the battery compartment, as indicated by the symbols on the inside of the com-
part ment.
d) Replace the battery cover.
3.2 FiveGo™ clip
The FiveGo™ clip is an electrode holder that can be placed next to the display on either side of the hous-
ing. Mounting the clip is easy:
a) Remove the cover from the clip's fixing point (available on both sides of the meter).
b) Attach the clip by pressing it into the recess.
c) Slide the shaft of the sensor into the clip from above.
DO meter FG4
Installation
5