Temperature Unit (Temp. Unit); Measure Mode; Interface - Mettler Toledo Refracto 30PX Bedienungsanleitung

Menu (menu)
Example
(measured) refractive index at 15°C (T
(measured) refractive index at 26°C (T
1.3334 – 1.3324
26 – 15
α x 1000 = 0,091; enter this value into the instrument.
5.3

Temperature Unit (Temp. Unit)

Unit for displaying the temperature in °C or °F (selectable).
5.4

Measure Mode

Configuration of sample identification and method of data storage.
Sample Name
Mode
Labo
Field
Custom User-defined setting.
5.5

Interface

PRN Printer interface
Data transfer to the printer
Printer with serial interface and connected infrared adapter. Results are
formatted for output to a printer.
Transfer rate (baud rate), parity, stop and data bits must be configured
according to the peripheral device.
The following settings are required for the METTLER TOLEDO LC-P45
printer:
Baud rate
Parity
Stop bits
Data bits
RS Serial interface. The Excel macro "PortableCapt" for data transfer to the
PC via the infrared adapter is located on the HelloCD™.
See Chapter 8.2.
IrDA Data transfer to the PC with the integrated IrDA interface in accordance
with protocol 1.20.
10
= 0.0000909
Sample identification.
A letter (A ... Z or space) can be set for the identification of
samples.
Method of data storage.
By pressing the ok/measure key the result is saved and trans-
ferred (printer, PC).
By pressing the ok/measure key the result is saved.
Memory in Save results.
Auto
Manu
Memory out Transfer result to PC or printer.
Auto
Manu
9600
none
1
8
): 1.3334
1
): 1.3324
2
Save result automatically.
Result saved by pressing the
ok/measure key.
Transfer result automatically.
Transfer result by pressing the
key.
METTLER TOLEDO Refracto 30PX/GS