Date & Time - Carl Valentin FLEXICODE Schnellreferenzhandbuch

Date & Time
Keys: , , ,
Set date and time
Key:
Summertime
Key:
Start of summertime
(format)
Key:
Start of summertime (date)
Key:
Start of summertime (time)
Key:
End of summertime (format) Select the format in which you want to define end of summertime.
Key:
End of summertime (date)
Key:
End of summertime (time)
Key:
Time shifting
, , , ,
The upper line of display shows the current date, the second line the current time.
With keys and you can change to the next or previous field. With keys
can increase and/or decrease the displayed values.
On: The module automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Select the format in which you want to define beginning summertime.
DD = day
WW = week
WD = weekday
MM = month,
Y = year
next day = only next day is taken into consideration
By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
By means of this function you can define the time when you want to start summertime.
By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
By means of this function you can define the time when you want to stop summertime.
By means of this function you can enter time shifting in hours and minutes (for automatically
adjustment from summer and wintertime). This entry refers to the currently set printer time.
English
, , , ,
Flexicode
and you
121