Emulation; Date & Time - Carl Valentin Spectra 107/12 Schnellreferenzanleitung

Spectra

Emulation

Keys: , , ,
Key:
Protocol:
CVPL: Carl Valentin Programming Language
ZPL: Zebra
Press keys
printer is restarted and ZPL II
Key:
Printhead resolution:
At activated ZPL II
Key:
Drive mapping:
The access to Zebra
Date & time
Keys: , , ,
Key:
Set date and time:
The upper line of display shows the current date, the second line the current time.
With keys
can increase and/or decrease the displayed values.
Key:
Summertime:
On: The print module automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Key:
Start of summertime (format):
Select the format in which you want to define beginning summertime.
DD = day, WW = week, WD = weekday, MM = month, YY = year,
next day = only next day is taken into consideration
Key:
Start of summertime (date):
By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in March (03).
Key:
Start of summertime (time):
By means of this function you can define the time when you want to start summertime
Key:
End of summertime (format):
Select the format in which you want to define end of summertime.
Key:
End of summertime (date):
By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
Example: summertime is automatically adjusted at last Sunday in October (10).
Key:
End of summertime (time):
By means of this function you can define the time when you want to stop summertime.
Key:
Time shifting:
By means of this function you can enter time shifting in hours and minutes (for automatically
adjustment from summer and wintertime). This entry refers to the currently set printer time.
92
All manuals and user guides at all-guides.com
, ,
®
Programming Language
and to select the protocol. Press key
®
commands are transformed internally into CVPL commands.
®
emulation the printhead resolution of the emulated printer must be set.
®
drives is rerouted to the corresponding Valentin drives.
, , ,
and you can change to the next or previous field. With keys
English
to confirm the selection. The
and you