Interface; Emulation - Carl Valentin FLEXICODE Schnellreferenzhandbuch

Flexicode

Interface

Keys: , , ,
COM1 / Baud / P / D / S
Key:
Start sign / End sign
Key:
Data memory
Key:
Port test

Emulation

Keys: , , ,
Protocol
Key:
Printhead resolution
Key:
Drive mapping
Key:
PJL (Printer Job Language) Status information regarding the print order can be indicated.
120
, , , ,
COM1:
0 - serial interface Off
1 - serial interface On
2 - serial Interface On; no error message occurs in case of a transmission error.
Baud rate:
Indication of bits which are transferred per second.
Following values are possible: 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
P = Parity:
N - No parity
E - Even
O - Odd
Please observe that the settings correspond to those of the module.
D = Data bits
Setting of data bits. Value range: 7 or 8 Bits.
S = Stop bits
Indication of stop bits between bytes.
Value range: 1 or 2 stop bits.
SOH: Start of data transfer block
ETB: End of data transfer block
Standard: After starting a print order the module buffer receives data as long as it is filled.
Advanced: During a current print order data is received and processed.
Off: After starting a print order no more data is received.
Check whether the data are transferred via the interface.
Press the and keys to select standard (on). Press the
any port (COM1, LPT, USB, TCP/IP) is printed.
, , , ,
CVPL: Carl Valentin Programming Language
®
ZPL: Zebra Programming Language
Press keys and to select the protocol. Press key
module is restarted and ZPL II
®
At activated ZPL II emulation the printhead resolution of the emulated device must be set.
NOTICE!
If the printhead resolution of the Zebra
device, then the size of objects (e.g. texts, graphics) complies not exactly.
®
The access to Zebra drives is rerouted to the corresponding Valentin drives.
NOTICE!
As the build-in fonts in Zebra
cause small differences in the text image.
, ,
Hex format 01
Hex formal 17
, , ,
®
commands are transformed internally into CVPL commands.
®
printer differs from that of the Valentin
®
printers are not available in Valentin devices this can
English
key and the data sent via
to confirm the selection. The