Overheating Protection - Silvercrest SEAD 1800 A1 Bedienungsanleitung

GB
CY

Overheating protection

12
5) Regularly stir the liquid so that the heat is evenly distributed.
6) When the desired temperature has been reached, signal tones will sound.
You can drain off liquids without solid particles through the tap 0:
WARNING - PROPERTY DAMAGE!
► Do not pour off liquids with solid constituents, for example, soups.
The solids will block the pouring tap 0!
1) To do so, hold a cup or similar under the tap
lever q downwards.
2) When the desired amount of liquid is in the cup, release the dispensing lever
q.
NOTICE
► Should you wish to pour off a large volume of liquid, pull the pouring lever
q upwards until it stays in position. Then you do not have to hold the pouring
lever q.
NOTICE
► You can also keep stews warm in the preserving boiler. They do however
need to be stirred regularly to prevent them sticking to the bottom of the
appliance.
This appliance is fi tted with an overheating protector.
Overheating may occur if there is too little or no liquid in the preserving boiler.
In this case, signal tones sound and the symbol " " blinks in the display. In this
case, immediately pour some liquid into the appliance.
If no liquid is added, the appliance switches itself off after 5 minutes. Once you
have topped it up with liquid you can restart the appliance.
0 and press the dispensing
SEAD 1800 A1