Overheating Protection - Silvercrest SEAD 1800 A1 Bedienungsanleitung

GB
IE

Overheating protection

12
6) When the desired temperature has been reached, signal tones will sound.
7) Liquids that have no solid constituents can be served through the pouring
tap 0. For this, hold a suitable receptacle under the pouring tap 0 and
press the pouring lever q down.
When the desired amount of fl uid is in the receptacle, release the pouring
lever q.
NOTICE
► Should you wish to pour off a large volume of liquid, pull the pouring lever
q upwards until it stays in position. Then you do not have to hold the pouring
lever q.
WARNING - PROPERTY DAMAGE!
► Do not pour off liquids with solid constituents, for example, soups.
The solids will block the pouring tap 0!
NOTICE
► You can also keep stews warm in the preserving boiler. They do however
need to be stirred regularly to prevent them sticking to the bottom of the
appliance.
This appliance is fi tted with an overheating protector.
Overheating may occur if there is too little or no liquid in the preserving boiler.
In this case, signal tones sound and the symbol " " blinks in the display. In this
case, immediately pour some liquid into the appliance.
If no liquid is added, the appliance switches itself off after 5 minutes. Once you
have topped it up with liquid you can restart the appliance.
SEAD 1800 A1