C) Checking And Setting The Pitch Value - Reely SKY Blue Twister Bedienungsanleitung

c) Checking and Setting the pitch value

First check the correct mounting of the servo lever at the swash plate servos. If the steering stick for the pitch control
is in the middle position, the servo levers must be in a 90° angle to the steering linkages.
The pitch value of the main rotor blades should be 0°. To measure the pitch value, you must use an appropriate pitch
adjustment gage.
For the different flying attitudes, the following combinations have proved to be an ideal starting basis for the setting of
your personal values.
Hover flight
Point Stick position %
(Stick)
1 0
2 25
3 50
4 75
5 100
Simple acrobatic flight
Point Stick position %
(Stick)
1 0
2 25
3 50
4 75
5 100
Extreme acrobatic flight (3D)
Point Stick position %
(Stick)
1 0
2 25
3 50
4 75
5 100
38
Motor capacity % Pitch value
(Power)
0 0°
40 2° to 3°
70 5° to 6°
85 7° to 8°
100 9 to 11°
Motor capacity % Pitch value
(Power)
90 -5°
85 0°
80 5° to 6°
85 7° to 8°
100 9° to 11°
Motor capacity % Pitch value
(Power)
100 -8° to -10°
90 -4° to -5°
80 0°
90 4° to 6°
100 9 to 11°
100
85
70
40
0
25 50
Stick %
100
90
85
80
0
25 50
Stick %
100
80
0
25 50
Stick %
75
100
Figure 15a
75
100
Figure 15b
75
100
Figure 15c