Commissioning The Answering Machine (Only Comfortel 2600) - Auerswald COMfortel 1600 Installationsanleitung

Commissioning

Note: If the date and time are not yet configured in the PBX, only the name
and version of the telephone are displayed.
Further Steps
– Configure the telephone according to your requirements. Carry out the con-
figuration either using the menu on the telephone display (see the Opera-
tion and Configuration Instructions of the telephone) or using the PC soft-
ware included in the package (recommended; see
– If necessary, carry out a firmware update in order to extend the telephone
with the newly available functions (see
features can be found in the internet (see www.auerswald.de/service).

Commissioning the Answering Machine (only COMfortel 2600)

Requirements
– Standard SD or SDHC card with the following features:


1.
Insert the memory card with the contacts directed upwardly first into the slot
marked with
Notes:
The standard announcements for different answering machine functions
are automatically copied from the telephone to the memory card (only Ger-
man and English).
48
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
COMfortel 2600: Tap on OK.
The date and time as well as the name of the internal subscriber are
displayed. The telephone is now ready for use.
SD memory card specification 1.01 or SDHC memory card specification
2.00
With a capacity of 8 GB
on the bottom of the telephone.
When is shown at the bottom right of the display, this indicates that
the memory card has been initialised and the required directory struc-
ture has been created.
As soon as
ready to use. Inbound calls are accepted (at first without an announce-
ment).
is shown instead of
page 52).
page 54). Information about new
, the answering machine is