Auerswald COMfortel 1600 Installationsanleitung Seite 37

PBX
COMpact 4000
COMpact 5000/R
COMpact 5010 VoIP
COMpact 5020 VoIP
COMmander 6000/R
COMmander 6000 RX
*.The second value takes effect when operating some telephones with
wall-mounted power supply, Type no. FW7577/EU/40.
Important: Only available for operation on the PBXs COMpact 4000,
COMpact 5000/R and COMmander 6000/R/RX (with Firmware 6.0A or
later): During a call, the COMfortel 2600 allows you to accept another call
and record it simultaneously on the local answering machine. When a sec-
ond call is signalled as waiting, the PBX reserves the second call channel
of the internal S
phone at the same port cannot initiate a call, accept an incoming call and
pick up a call. Simultaneous call acceptance and recording by the local
answering machine is not possible while another telephone is on a call at
the same port. In order to ensure that the full scope of functions is available,
you should connect only 1 telephone per port.
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
Max. power distribu-
tion of the total of all
internal S and U
0
ports
24 W (4 W per port)
24 W (4 W per port)
8 W (4 W per port)
24 W (4 W per port)
60 W (4 W per port)
160 W (4 W per port)
port for this function. At this particular time, a second tele-
0
Important Information
Max. no. of without
wall-mounted power
supply
P0
12 (2 telephones per port)
12/20* (2 telephones per
port)
4 (2 telephones per port)
12 (2 telephones per port)
30/64* (2 telephones per
port)
80/112* (2 telephones
per port)
37