Connecting The Receiver - Auerswald COMfortel 1600 Installationsanleitung

Preparation
Do not connect to the 230 V mains supply before the telephone is actually
commissioned.
Fig. 6: Assembling and connecting the COMfortel Xtension300 key exten-
sion modules
Warning: Using the wrong power supply plug can result in a life-threatening
electric shock or can damage or destroy the device.
 For this reason, only use a power plug of type no. FW7577/EU/40.

Connecting the Receiver

1.
Insert the RJ-10 connector at the longer, plane end of the spiral cord into
the socket labelled with
2.
Guide the cable to the outside using the corresponding cable channel.
3.
Insert the other RJ-10 connector of the spiral cord into the socket on the re-
ceiver.
44
COMfortel 1600/2600 - Firmware V1.8 - COMfortel Set V3.10.0 - Setup V06 05/2015
on the lower side of the telephone.