Setting The Time Zone; Assigning The March Indication - Conrad WS222 Bedienungsanleitung

-
+
EXIT
configuration
or
NEXT
configurations
assigning
-
+
NEXT

Setting the time zone

The entry of the time zone is required for the calculation of
sunrise and sunset times.
Enter the difference to the GMT (Greenwich Mean Time).
The following values are applicable for Germany:
• summer time
• winter time
time
Set the current value for your time zone via the + and - keys.
zone
To ensure the correct functioning of the weather station, all
settings required have been performed at this point. The
extended settings are not necessary for normal operation.
close the
Press the EXIT key to close the configuration mode and turn
back to the normal mode. Afterwards, the base station is in
mode
normal operating mode.
Press the NEXT key to set further values if required. See
extended
below.

Assigning the march indication

The following representations can be assigned to the course
indication:
• air pressure
• indoor temperature
• outdoor temperature
If the march indication is assigned to one of the two tempera-
ture indications, the symbol "
corresponding display field.
Fading-in/Identification in the display field:
P = air pressure
O = outdoor temperature
I = indoor temperature
the
Select the assignment desired via the + and - keys.
march
Press the NEXT key. Now, the unit of the temperature indica-
direction
tion can be selected.
+ 2
+ 1
" appears additionally in the
61