Troubleshooting - Conrad 64 61 09 Bedienungsanleitung

12. Troubleshooting

Take note of all the safety instructions in these operating instructions!
Problem
No reception
Disturbance of
other devices
because of
outdoor sensors
Outdoor sensors
are not
recognised
76
Solution
• The distance between base station and outdoor sensors is too large.
Change the location site of the outdoor sensors.
• Objects or shielding materials interfere with radio reception. The same
is the case for other electronic devices, eg televisions or computers.
Change the location site of outdoor sensors and base station.
• The batteries of the outdoor sensors are weak or empty. Try to insert
new batteries into the outdoor sensors.
• A different transmitter on the same or an adjacent frequency interferes
with the radio signal of the outdoor sensors. This may be, eg radio-
controlled headphones, radio-controlled speakers or similar devices.
Such products are not in use all the time; the radio reception may be
faultless the next day for example, this makes a search for the cause
more difficult.
• The outdoor sensors send their data at different intervals to the base
station. In this brief space of time disturbances from other devices are
possible. A very brief interfering signal may be noticeable in the case of
a radio-controlled headphone, for example.
• Stick to the sequence when inserting the batteries. Insert the batteries
in the temperature/air humidity sensor first, then in the UV sensor and
finally into the base station.
Wait until the base station receives a data packet from the sensors. This
can take several minutes.
• If other radio sensors are operated, eg by your neighbour, this can lead
to reception problems. Use a different transmission channel on the
temperature/air humidity sensor. It may help to set up the base station
and the sensors in a different place.