F) Display Of Uv Value (Uvi Or Med/H) - Conrad 64 61 09 Bedienungsanleitung

f) Display of UV value (UVI or MED/h)

In the area of the UV value display, there are several icons depicted next to the corresponding reading
which show you the UV exposure at one glance:
UV exposure
Low
Intermediate
Strong
Very strong
Extreme
To switch between the "UVI" or "MED/h" display, you do the following:
• Press the "MODE" button until (approx. 2 seconds) the language display (for the abbreviation of
weekdays) flashes at the very bottom right, next to the display for the time.
• Briefly press the "MODE" button several times, until the value of the UV display flashes.
• By pressing the "+" or "-" button briefly on the right of the base station, you can now switch between
the unit display "UVI" or "MED/h".
• Then wait a couple of seconds until the display stops flashing.
Alternatively, you can press the "MODE" button until none of the setting options flash and the
normal time display appears on the bottom.
66
UVI Display
0 - 2.9
3.0 - 5.9
6.0 - 7.9
8.0 - 10.9
11 - ...