Display Content During Normal Operation; Operating Modes (Auto / Manu / Holiday Function) - eQ-3 EasyHome control Bedienungsanleitung

• Confirm the setting with the OK button.
• "ACC" will show on the display.
• Confirm with the OK button.
The wall thermostat must then be deleted by restoring
the factory settings (see chapter 18 Reset).

12. Display content during normal operation

During normal operation, the operating mode, weekday,
nominal temperature, time, radio synchronicity and swit-
ching periods are displayed.
The bars for switching periods of the week programme are
displayed for each time interval for which the nominal tem-
perature is above the reduced temperature. An example
can be found in sec. 17.1.1.

13. Operating modes (Auto / Manu / Holiday function)

You can choose between the operating modes auto, manu
and holiday function:
Auto: Week programme – automatic temperature control
according to stored week programme.
Manu: Manual operation – the temperature is set manu-
ally with the (+) and (-) buttons.
Holiday function ( ): Setting a temperature that
should be held until a fixed end time.
You can configure the settings for the operating modes
39