Setting The Week Programmes(Pro) - eQ-3 EasyHome control Bedienungsanleitung

Mode button reverts to the previous level. The menu closes
automatically after 60 seconds of inactivity.
dAt:
Change time and date (sec. 7.)
UnL: Teach-out wireless components (UnL) (sec.
11.)
Pro:
Set the week programme (sec. 17.1)
t-d: Switch time and date display (sec. 17.2)
S-A: Change display of nominal and actual value
(sec. 17.3)
bOS: Set valve opening and length of "Boost" func-
tion (sec. 17.4)
Boost:
Set boost function (sec. 17.5)
Set holiday function (sec. 17.6)
dEC: Set valve protection function (sec. 17.7)
AEr: Set "Open window temperature" for automatic
temperature decrease during airing (sec. 17.8)
tOF: Set temperature offset (sec. 17.9)
rES: Reset factory settings (sec. 18.)

17.1 Setting the week programmes(Pro)

In the week programme, for each weekday up to 6 heating
phases (13 change settings) can be set separately. The
programming is carried out for the days chosen, whereby
temperature settings have to be set for the entire period
between 00:00 and 23:59.
42